HORIZONTAL TIE BALER-

this continuous baler machine is built with a purpose of giving high production rate in less time with less labour,this auto tie baler machine done work is equal to 4-6 labour,its a very simple and re defined concept of pressing paper,carton,cardboard.

paper baler machine is made for high production,who are capable of collecting scrap upto 30-100 tons per daily,this continuous baler machine is attached with new spares like conveyor who take the scrap from ground level to the top of the machine,then there is square in top of the machine chamber where this conveyor drop the scrap which is collected from the bottom of ground.

in single cycle conveyor deposited the scrap from 100 kgs to 300 kgs in the paper baler machine chamber.after feeding the full chamber conveyor will stop and auto tie baler main cylinder will press the scrap till its last cycle.then same process will repeat one by one after six stroke automatic tying start.after some cycle machine will eject the bale which is approx 600-1000kgs according to the model of machine.

hence for installation of this baler machine you required big area,where ground level is plane and cemented or any type of plane surface

for lifting of bale owner required one lifter movable machine which is capable of lifting weight upto 1.5 ton in one time

RANGE FROM 40-60 LACS

HORIZONTAL TIE BALER

 

 

continuous tie baler machine

 

                

 

 

 

                                    TECHNICAL SPECIFICATION

DESDRIPTION        MODEL SH-5000         MODEL SH-5002
BALE SIZE

 

        (W) 35″ X (H) 23”         (W) 43’’ X (H) 50’’
BALING CHAMBER SIZE     35″ X 23″ X 84″      43″ X 23″ X 84″
FEEDING CHAMBER SIZE     35″ X 35″ X102″

 

      43″ X 43″ X102″

 

BALE WEIGHT.600 – 750 K.G. APPROX. (4-6 STROKE)

 

700 – 1000 K.G. APPROX. (4-6 STROKE)

 

IDLE CYCLE TIME130 SEC FOR SINGLE STROKE

 

150 SEC FOR SINGLE STROKE

 

MOTOR50 HP. 1440 RPM60 HP. 1440 RPM
ESTIMATED PRODUCTION3 TO 4 TONS/HR

 

6 TO 8 TONS/HR

 

OIL TANK CAPACITY1200 LTRS.

 

1400 ltr
OVERALL DIMENSION(L) 30’ X (W) 5’ X (H) 9’ (APPROX)

 

(L) 32’ X (W) 6’ X (H) 10’ (APPROX)

 

NO. OF TIES

 

36
PROVIDEDBLADES FOR CUTTING OF SCRAP

CHILLER – CAPACITY OF 2 TONS

OPERATION AUTOMATIC

CONVEYOR- belt type

 

BLADES FOR CUTTING OF SCRAP

CHILLER – CAPACITY OF 2 TONS

OPERATION AUTOMATIC

CONVEYOR- belt type

 

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes:

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>